Map of the run
Hover or tap a line for its name and numbers; click to open its page.
- this run
- lifts
- ▲ top
- ○ end
- north is up
- Relief: GeoPeaks, from IGN LiDAR HD and swisstopo swissALTI3D. Runs and lifts: © OpenStreetMap contributors.
Keyboard: Tab goes through the lines, Enter opens one, + and − zoom, the arrows move the map.
Elevation profile
Hover, tap or use the arrow keys along the run: gradient, distance and altitude of each 50 m stretch. The point follows on the map.
Steepest 20 m: 39 %, 500 m from the top
- under 15 %
- 15–25 %
- 25–35 %
- 35–50 %
- over 50 %
Similar runs nearby
- Coutalays935 m · ↓ 199 m · 39 % · avg. 21 %
- Paquérages721 m · ↓ 144 m · 39 % · avg. 20 %
- Campanule1.03 km · ↓ 220 m · 36 % · avg. 21 %
- All the steepest runs of Portes du Soleilranked by gradient
Runs of Portes du Soleil with the closest gradient and vertical drop.
How it ranks in Portes du Soleil
- #158 of 380steepest 20 m
- #172 of 381average gradient
- #99 of 381vertical drop
- #88 of 381length
Among the 381 named runs of Portes du Soleil measured by GeoPeaks. 1 run is left out: its line climbs back up, or has a short pitch far steeper than the rest — maybe a bridge, a tunnel or a cut that the bare-ground relief does not show. Steepest · Longest · Biggest drop
Questions
How long is Eglantine?
Eglantine is 1.31 km long, measured horizontally along its line, and drops 266 m, from 1,659 m to 1,393 m.
How steep is Eglantine?
Its average gradient is 20 %; its steepest 20 m reach 39 %, 500 m from the top.
Which lift goes to the top of Eglantine?
The top of Eglantine is reached by Rosta (Chairlift).
Where does Eglantine end?
It ends at 1,393 m.
What difficulty is Eglantine?
OpenStreetMap marks it as: Red.
| Length (horizontal) | 1.31 km 0.81 mi |
|---|---|
| Top | 1,659 m 5,443 ft |
| Bottom | 1,393 m 4,570 ft |
| Vertical drop | 266 m 873 ft |
| Average gradient | 20 % |
| Steepest 20 m | 39 % |
| Difficulty | Red (As mapped in OpenStreetMap) |
Start at the top of Eglantine, in the browser of a computer.
Ski this run in 3D